               
|
Proud
member of a vast right wing conspiracy
OIA
Needs Your Idle CPU Time. Click Here For Info & Join Our RC5
Team
Overclock
Competition II Gallery
Click
here for Gallery 15
Welcome to the Overclock Competition II Gallery. Here you will find
entries to OIA's second overclocking competition.
Entry
#1
Submitted
by: James aka Pheenix
Email:
jebbs@cfl.rr.com
URL:
http://home.cfl.rr.com/pheenix
I
am entering my system as the first entry in the Overclock Competition
II. It is a p3 800E@993Mhz system (124Mhz FSB). I also plan
on entering a Celeron2 600@900 system (if I am able to make it stable at
900). At 993Mhz, core voltage was 1.75v on an ASUS P3B-F mobo
cooled by an Alpha PEP66 HSF.
Entry
#2
Submitted
by: playafly187
Email:
gknight1@midsouth.rr.com
URL:
www.project1ghz.com
classic athlon 700 @ 1060
(900 core) benchmarks
can be found on his site K7M
mobo1.85 v cooling:
vos32, 92mm case fan, 2coolpc plus, super slot fan, ultimate hdd
cooler
Entry
#3
Submitted
by: Menace
Email:
menace.one@ntlworld.com
PIII700@1120 (160fsb) @
1.95V, 80W peltier
and watercooling Asus
CUSL2 1x256Mb
Crucial PC133 @ 3-2-2 Hercules
Prophet II 64Mb (250/445) Full
load temps never higher than -10C
\
Team
[H]ard|OCP
Entry
#4
Submitted
by: Gary Dunne
Email:
dunnefamily@yahoo.com
My
CPU is a Slot 1 PIII 650e (cB0) running on a 6.5x multiplier
at 155fsb (ie. 55% OC), just pushing me over
the 1GHz barrier to 1007MHz! My motherboard is an
ABIT BH6 Rev 1.1, running at the highest FSB available
on this board. My core voltage is
1.80V and I use a Slot 1 Golden Orb HSF
that is fed outside air directly via a 1 ft length of
automotive air intake hose that routes through the top
two 5 1/4 drive bays, with a grill covered fan blowing
air through the duct to the CPU. I also have a
super duper slot fan, one intake fan at the bottom
and
another outlet fan at the top. Case temp runs around
8C above ambient.
Team
[H]ard|OCP
Entry
#5
Submitted
by: Willi
Email:
willi@planetquake.com
CPU: Week 23 Duron 700
FSB: 113 (226 DDR) Multiplier:
9x Speed: 1017mhz
Core Voltage: 1.75 volts
Motherboard: MSI K7T Pro
Cooling: GW FOP38 Method:
I actually had to cut bridges in order to reset the multiplier.
No pussy multiplier controls on my motherboard!
Entry
#6
Submitted
by: Baucum
Email:
baucum561@netzero.net
Athlon
500@864 Mhz 1.95 core voltage and Alpha 7125 cooler. I just ran Sandra,
WCPUID, and FSB. I am very happy with the speed of this
system!!!:-)
Team
[H]ard|OCP
Entry
#7, 8, and 9 (yes, this mofo's got 3 entries :)
Submitted
by: Josh Biggs
Email:
joshua.biggs@colorado.edu
The
first system is a blue core Athlon Thunderbird 950 at 1.1ghz.
Abit KT7-Raid 1.85
Volts Alpha Pal6035,
Arctic Silver, Delta 38cfm fan and a copper spacer
The
second system is a Katmai Pentium 3 550 running at 660mhz.
Asus
P3B-F 2.2 volts
Alpha P3125, Arctic Silver, 2 Sanyo
Denki fans
The
third system is a CC0 Pentium 3 FCPGA 700 Mhz running at 1158 Mhz with a
165
FSB!! Abit BX-133
Raid 1.95 volts
Team
[H]ard|OCP stealing the spotlight on this one :)
Entry
#10
Submitted
by: Proze
Email:
overclocker@icon.co.za
AMD Duron 600 @ 1102 (10.5*105)
Asus A7V rev 1.02 (NO voltage mod
done) 128MB Generic PC100
Ram @ CAS2 Voltage set
to 1.85 on mobo, but MBM5 says 1.92V. Cooling:
Homemade watercooling rig: 130gph(US) inline pump, vw jetta II heater
core as radiator, homemade copper waterblock.
|